chhaustralia

OUR PRODUCTS

hyJOIST®

hyJOIST® Engineered I-Joists are cost effective, lightweight I-Joists used in residential and commercial construction.

  hyJOIST

 

Benefits

Consisting of structural LVL flanges and a structural plywood web connected using a Type A waterproof bond, hyJOIST is strong, light and easy to install.

  • Straight, uniform & dimensionally stable in a lightweight form
  • Greater design flexibility for an economical floor joist layout
    • Available in 10 section depths
    • 3 different flange widths
    • Long lengths up to 13.2 metres
  • Easier installation of services within the floor space
  • Easier to install compared to hardwood and steel alternatives
  • Sourced from environmentally sustainable plantation pine
  • Stringent quality control - EPWAA certified
 

Suitable Applications include

  • Floor joists for houses and commercial floors
  • Roof rafters & purlins for houses and commercial systems (suited to low pitch applications)

HYJOIST DISTRIBUTORS

Click here for hyJOIST distributors

Peace of Mind against terminates - hyJOIST H2-S Terminator

hyJOIST is also available treated (H2-S) for protection against termites and other insects in above ground, weather protected applications in areas south of the Tropic of Capricorn. It gives all the benefits of structural LVL with added termite deterrent qualities.

Backed by a 25-year fully transferable guarantee from the chemical manufacturers

  • Each beam is treated to the core during manufacture.
  • Clearly marked with H2-S for ease of identification
  • Backed by a 25-year fully transferable guarantee from the chemical manufacturers
 

Field & Product Support

hyJOIST is supported in the field by an experienced engineering support group able to assist with enquiries ranging from design to installation advice.

  • PHONE - 1800 808 131

Local TECHNICAL MANAGERS

Click here to locate your local technical manager

 

Range Depth (mm) Pieces per packs
Flange Width (mm)
45 63 90
HJ200 45 200 41    
HJ240 45 240 41    
HJ240 63 240   31  
HJ240 90 240     21
HJ300 45 300 41    
HJ300 63 300   31  
HJ300 90 300     21
HJ360 63 360   31  
HJ360 90 360     21
HJ400 90 400     21
 
Legend  Treatment
 

H2- S Treatment

 

H2-S treated or untreated

hyJOIST Range

More options for more economical floor joist layouts

Select the economy section (HJ240 45, HJ300 45 & HJ360 63) of appropriate depth to accommodate the spans of the main area of the floor. Cater for any larger spans in the floor area using the wider flange options of corresponding depth.

Technical enquiries

Expert technical support is only a phone call away. Carter Holt Harvey provides expert technical support through an in-house network of engineers and technical managers. This free service is available by simply calling 1800 808 131.

Description and Applications

 

hyJOIST is an engineered I-Joist manufactured using structural LVL flanges and a plywood web connected using a Type A waterproof bond.

Applications

hyJOIST is suitable for structural applications including residential and commercial floor and roof  rafter systems, and industrial purlins.  hyJOIST is not intended to support brickwork or other heavy masonry products.

Treatment for Durability

hyJOIST H2-S Terminator is available in all sizes and is part of the Carter Holt Harvey Terminator range.  hyJOIST H2-S Terminator is treated against termites south of the Tropic of Capricorn.  The treatment is applied to the glueline during manufacture to achieve full termite protection to the core of the beam.  No further sealing is required on cut ends or holes.

Moisture content

hyJOIST, at time of despatch from the manufacturing site has a moisture content of between 8-15%.

Structural grading

The properties of hyJOIST have been determined by testing as required by AS/NZS 4357, and are not substitutable for F grades, MGP grade, or other proprietary I-joists.  Design verification using the Carter Holt Harvey free designIT software or selection guide (located in the hyJOIST design guide) is required to ensure suitability.

Certification & Compliance

hyJOIST flanges are manufactured in accordance with AS/NZS 4357, and the plywood web is manufactured in accordance with AS/NZS 2269.  hyJOIST is product certified by the Engineered Wood Products Association of Australasia (EWPAA), which is JAS-ANZ certified.  Participation and compliance with this process based quality control scheme ensures ‘Evidence of Suitability’ in accordance with Clause 1.2.2 of the Building Code of Australia (BCA).

Technical Literature

See the brochure tab for all available literature related to hyJOIST.

Handling and Installation

Storage

The following recommendations regarding storage are made in order to ensure that the full benefits of hyJOIST as a dry, straight and true material are available at the time of installation.

  1. Stack on level bearers to keep flat and straight.
  2. Stack well clear of the ground for good ventilation.
  3. Store under cover to keep dry prior to installation.

Note: After installation, exposure to sun and rain for normal periods of construction is not a cause for concern.

 

General Installation

hyJOIST should be installed strictly in accordance with the details supplied in the hyJOIST Installation Guide.

Technical Note: Rimboard

Carter Holt Harvey sometimes receive requests to assist specifiers with technical advice on other generic products when used in conjunction with hySPAN LVL and hyJOIST Engineered I-Joists. The following Technical Note entitled 'Rimboard' is an example of this - Download.

Racking Through Floors

Modern house designs often feature large open plan living areas with large windows or doors to 'bring the outdoors inside'. In two storey houses this normally means deep section engineered floor joists capable of spanning over lower level open areas.
More information is contained in the hyJOIST design guide and hyJOIST installation guide
 

Racking Through Floors - Detail


hyJOIST Cantilevers

hyJOIST floor joists are capable of meeting the loading requirements for cantilevers as defined in AS/NZS 1170. For external use, hyJOIST floor joists must be protected from becoming wet by a fully waterproof deck. In the case of non-waterproofed decks the use of outriggers of suitable natural durability or preservative treated to H3 as per AS/NZS 1604 is suggested. Outriggers can also provide a step down to the deck reducing the likelihood of water ingress at openings.
More information is contained in the hyJOIST design guide and hyJOIST installation guide.

Health & Safety

The MSDS available from the website details all health and safety precautions required when using hyJOIST

Environmental certification

hyJOIST is manufactured from 100% renewable plantation timber. All timber is sourced from Australian Forestry Standard and/or FSC certified forests.

Technical Publications

hyJOIST: Introduction

6 pages
Format: PDF
FileSize: 1.2MB
Download File>

 
hyJOIST 'Options Range Design Guide'

12 pages
Format: PDF
FileSize: 509K
Download File>

 
hyJOIST 'Options Range - Guide for installation'

16 pages
Format: PDF
FileSize: 767K
Download File>

 
hySPAN: Use in weather exposed applications

2 page
Format: PDF
FileSize: 208K
Download File>

MSDS

Material Safety Data Sheet - LOSP H2-S treated LVL, plywood & I-joists
Format: PDF
Filesize: 1KB
Download file >>
Material Safety Data Sheet - Untreated LVL, Plywood & I-Joists
Format: PDF
Filesize: 1KB
Download file >>
Carter Holt Harvey is committed to on-going reviews of its MSDS's to ensure they reflect all currently available information. In the event that you require more detail on any MSDS or would like to confirm that you have the most recent MSDS for a particular product, please contact the Marketing Department via phoning 132 321.

Hybeam H2 graduates from high school

15 December, 2003 When John Kendall was commissioned to build single storey additions to the Seventh Day Adventist School in Victoria’s Nunawading, the use of Hybeam H2 proved to be quite an education...

A house that's futurebuild through and through

  21 June, 2004 Brad Cole, well known in the trade in New South Wales as technical manager for futurebuild distributor Dindas Lew, put his money where his mouth is...

hySPAN helps get heritage renovation off the ground

21 June, 2004 Owner, Carolyn Hawken enjoys just sitting in her modern, multi-purpose space - her 'shed out the back' - and looking across her garden at the 1890's Queensland cottage it was built to accompany...

Glassy job with Hybeam H2

03 September, 2004 You would expect the head office of a glass manufacturer to have plenty of sparkle...

It feels like Sydney

03 September, 2004 Merewether Beach is a beachside suburb, which in terms of property, is top of the market in Newcastle...

Mexican miracle comes to Perth hillside

03 September, 2004 What does the miraculous apparition of Mary, on a hill north west of Mexico City, have to do with a contemporary development of colourful, luxury units in Perth? Builder Ben Pitt describes a new project overlooking Scarborough Beach that the owner has called ‘Guadalupe Hill’ and one which the locals are watching with interest...

Innovative houses, built with a window to the future

08 December, 2004 2004 is the Year of the Built Environment (YBE) and its showcase event, the ‘Houses of the Future’ exhibition, offers an exciting glimpse of the future of Australian housing...

hyBEAM's inside job on Pentridge Prison

01 April, 2005 Coburg's old Pentridge Prison is being transformed into an urban piazza precinct, a commercial and residential hub with people now eager to get in rather than out...

The cool new face of coastal homes

01 April, 2005 West Coast architect Greg Jones is again putting a surprising spin on Victorian seaside architecture...

Chili's restaurant chain orders Hybeam 'supersize'

30 May, 2005 The American restaurant business, Chili’s, have opened a new eatery in Penrith...

New curved technology block gives students the edge

30 May, 2005 Peddle Thorp Architects (Hamilton) are linked to a multinational partnership of architects with offices in Australia, South East Asia and in the UK...

Turning out houses into art houses

30 May, 2005 When a client came to Latemore Design wanting a self- contained outbuilding on a sewered, sloping block with specific views for under $70k, he knew he had a challenge...

A triumph for LVL on so many levels

  09 September, 2005 The Hudson Brown project in the Auckland CBD is a large block of city apartments...

futurebuild building products-finally the weight is over

  09 September, 2005 Peter Murray is an architectural designer with Project Management Enterprises Ltd on New Zealand's sunshine coast...

Healthy saving for regional Medical Centre

09 September, 2005 Steve Tilse, of Tilse Building, discusses using a floor system, made up of Hyspan Structural LVL and Hybeam Engineered I-Joists by futurebuild, which saved the Scone Medical Centre precious time and money...

Timber beats steel in a feat of 'Imagineering'

09 September, 2005 Outside of Gisborne near Woodend, is the site of the new Fletcher residence...

Hybeam H2 not on the menu

10 June, 2003 Termites cause over $80 million damage each year in Australia...

A peaceful place to retire thanks to LVL floors

05 June, 2003 A peaceful place to retire thanks to LVL floors...

House of Hearts

19 September, 2003 The house built for one family and thousands of children...

Site by TinSoldier