chhaustralia

OUR PRODUCTS

edgeFORM®

edgeFORM® is laminated veneer lumber (LVL) specially prepared for use in concrete formwork applications as edge boards.

  edgeFORM

edgeFORM is manufactured from plantation timber veneers and assembled in a predefined pattern to be lighter, straighter and more uniform than traditional alternatives.


Benefits

  •  Arrised and painted red for moisture protection and easy on-site identification
  •  Straight and true sections - Easier to install and less prone to twisting and cupping
  • Lightweight and versatile - Faster to install than traditional alternatives
  • Sourced from environmentally sustainable plantation timber
  • Stringent quality control - EPWAA certified

Suitable Applications

  • Edge boards in concrete formwork framing projects
  • Boxing for residential slabs

CERTIFICATION

EDGEFORM DISTRIBUTORS

Click here for edgeFORM distributors


FIELD & PRODUCT SUPPORT

edgeFORM is supported in the field by an experienced engineering support group able to assist with enquiries ranging from design to installation advice
 

PHONE - 1800 808 131

 

LOCAL TECHNICAL MANAGERS

Click here to locate your local technical manager

Depth (mm) Width (mm) Length m Pieces per pack
4.8 6.0
100 36 50
150 36 40
170 36 35
200 36 30
240 36 25

Formaldehyde Emissions

All edgeFORM is manufactured using an 'A' Bond with less than 0.3mg/l Formaldehyde (equivalent to Super E0) emissions from the final product.

Formwork Solutions Guide

Formwork Solutions Guide

12 pages
Format: PDF
FileSize: 1.7MB
Download File>

No photo galleries available

MSDS

Edgeform Material Safety Data Sheet (MSDS)
Format: PDF
Filesize: 1KB
Download file >>
Carter Holt Harvey is committed to on-going reviews of its MSDS's to ensure they reflect all currently available information. In the event that you require more detail on any MSDS or would like to confirm that you have the most recent MSDS for a particular product, please contact the Marketing Department via phoning 132 321.

 

edgeFORM offers strong support for inner city Perth

In the middle of January this year Derwent Constructions began construction on yet another inner city development in Subiaco, five minutes from Perth's city centre.

This 10 storey block of strata titled luxury apartments called West Court Towers, is typical of the direction in which this area of Perth is going. The area used to be mainly professionals, solicitor's offices and doctor's surgery's but is leaning more toward residential developments.

This trend for inner city living, found in most urban centres around Australia, means that sizeable blocks of apartments are now in great demand. In building West Court Towers, Derwent Constructions ensured the structure was stable and well supported from the ground up. The structural engineers Meir, Chadwick Whitmore were consulted and Russell Williams a formworker from Ausform Constructions was brought in.

After 35 years 'in the game' as a formworker, Williams referred to West Court Towers as your run of the mill job and in recent years they would certainly be common. However with 10 storeys to go up it was also a large one. Williams had to form up a concrete transfer slab that was stable enough to hold up the rest of the building.

Such an important part of the structure requires heavy density concrete, he explained. To be optimally effective the transfer slab must be well supported and protected. In this case Williams used in excess of 200 cubic metres of Ecoply Formite, truFORM and edgeFORM LVL by Carter Holt Harvey Wood Products in the formwork system. One hundred and seventy Boards were used to form up step downs and rebates in the transfer slab. edgeFORM is specifically designed to offer structural support and easily identifiable by the distinctive orange coating to assist in moisture protection.

edgeFORM is a relatively recent development itself. As Williams says: 'I used to use oregon or hemlock which tended to twist and bow. This stuff is beautiful to work with because it stays straight and does the job the way it should be done'.

With the demand growing for such multi-storey apartment blocks in the inner city the demand for quality formwork and formworkers is only likely to increase. You could say that Russell Williams and edgeFORM will be in solid work for years to come.

 
<< Back
Site by TinSoldier