Pyneboard® RAW & LPM

Pyneboard particleboard is available in many sizes and thicknesses from 9mm to 33mm (for the complete range of sheet sizes click here).  The comprehensive range allows economic cutting of boards. Pyneboard is easy to work with normal woodworking tools as it has no grain direction so it is the same strength and appearance in all directions. The fine surface layers are also pre-sanded, ready for painting or laminating. Pyneboard is available in two grades, standard and moisture resistant substrates, making it ideal for cabinetry.

Pyneboard is also available surfaced with a white decorative paper.

Two finishes are available in Pyneboard white

  • Velvet – a delicate eggshell surface
  • Décor – a lightly dimpled texture

Features & Benefits

PYNEboard is available in two grades: standard and moisture resistant substrates. Where applications may be subjected to conditions of high relative humidity or occasional wetting, such as bathroom vanities and kitchen cupboards, PYNEboard MR should be used.

Compliance

Pyneboard is produced to meet Australian Standard AS/NZS 1859.1:2004 - Particleboard, and is also independently tested and accredited by the The Engineered Wood Products Association of Australasia (EWPAA).

Formaldehyde Emission

Formaldehyde emission meets the E1 standard requirement of ≤1.5 mg/L when tested in accordance with Australian/New Zealand Standard AS/NZS 4266.16:2004 Method of test 16: Formaldehyde emission – Desiccator method.

E0 (E zero) Pyneboard (<0.5 mg/L) is also available (note: minimum order quantities may apply).

Green Star environmental ratings – both E1 and E0 Pyneboard are eligible to earn points under the Indoor Environment Quality section of the Green Star Office Interiors program.
Click here to access a declaration that can be used for Green Star audit purposes.

For general facts about particle board and MDF products, including mechanical, physical and moisture properties, a useful source of information is the EWPA ‘Facts about PB and MDF’.

Chain of Custody

ISO9001:2008

Certificate No: QEC0592 (Gympie)

Certificate No: QEC1540 (Mt Gambier)

Certificate No: QEC1833 (Tumut)

 

Range

Pyneboard Sheet Sizes

Pyneboard is available in two grades: standard and moisture resistant substrates. Where applications may be subjected to conditions of high relative humidity or occasional wetting, such as bathroom vanities, and kitchen cupboards Pyneboard MR should be used.

Legend

Available in Standard grade only

Available in both Standard & Moisture resistance grades

Available in Standard grade only

PYNEboard White Sheet Sizes

Note: *33mm single sided only

RAW & LPM