Shadowclad® Ultra Groove

Shadowclad® Ultra features a factory applied exterior grade performance coating. Using a unique powder coating process on the panel face and edges means Shadowclad Ultra panels can be immediately top coated on site, eliminating (in most cases) the need for expensive and time consuming wet primers. H3 LOSP treated for vertical exterior applications, Shadowclad Groove features vertical 9mm wide grooves at 150mm centres across the face of the board. The Ultra coating is suitable for use with most paint and film forming stain systems. Always refer to your local coating manufacturer for coating advice.

The Ultra performance coating has a high 60-80 microns average film build, and can be up to 2 to 3 times thicker than traditional wet primers. This provides the undercoat of a 3 coat (1 undercoat, 2 top coats) paint system.

Request a Shadowclad product sample

Features & Benefits

  • Manufactured from sustainably grown plantation pine
  • Panels available in 2440mm and 2745mm lengths
  • Interlocking vertical shiplap joints for easy and weathertight installation.
  • Low formaldehyde emission, Super E0: < 0.3mg/L as tested to AS/NZS 2098.11
  • FSC® certified (SCS-COC-001316)
  • Bandsawn sheet surface provides a consistent tactile finish
  • Shadowclad exterior cladding system includes a wide range of purpose designed exterior flashings.
  • CHH Woodproducts installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable

Compliance

  • Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural

Range

Gallery

Internal 'W' Back Flashing

Internal 'W' Back Flashing

Internal Corner 'W’ Flashing

Internal Corner 'W’ Flashing

Window Jamb

Window Jamb

Window Top Flashing

Window Top Flashing

Internal 90 Degree Back Flashing

Internal 90 Degree Back Flashing

Horizontal Continous Flashing

Horizontal Continous Flashing

Flashing Junctions & Connections with Horizontal & Back Flashing

Flashing Junctions & Connections with Horizontal & Back Flashing

Overhangs & Ground Clearances

Overhangs & Ground Clearances

Internal Corner with 90° Flashing

Internal Corner with 90° Flashing

Internal Corner with W Flashing

Internal Corner with W Flashing

External Corner with Cover Boards

External Corner with Cover Boards

External Corner with Box Flashing

External Corner with Box Flashing

Mid Floor Horizontal Joint

Mid Floor Horizontal Joint

Vertical Sheet Joint- Groove Profile

Vertical Sheet Joint- Groove Profile

Vertical Sheet Joint- Texture Profile

Vertical Sheet Joint- Texture Profile

Ultra Groove