Ecoply® Non-Structural Square Edge

Ecoply® Non-Structural Square Edge plywood is manufactured for building applications which do not require specific structural properties. This may include temporary hoardings, non-structural packaging, general purpose construction, DIY projects, formwork for paths and driveways, furniture and temporary weather proofing for damaged buildings. It is available untreated and in a range of thicknesses from 7mm to 25mm.

Features & Benefits

  • Manufactured from sustainably-grown Australian and New Zealand plantation pine
  • Edge profile is square edge
  • Sanded face and back with potential open defects
  • Sheet thicknesses 7mm, 9mm, 12mm, 15mm, 17mm, 19mm and 25mm
  • Sheet dimensions 2400mm x 1200mm
  • Low formaldehyde emission. Super E0 < 0.3mg/L as tested to AS/NZS 2098.11
  • FSC® certified (SCS-COC-001316) or (SA-COC-002970) upon request


  • Non-Structural plywood is manufactured under a strict quality programme with an ‘A Bond’ construction as per AS/NZS 2269 for Structural Plywood Non-structural plywood is not compliant with AS/NZS 2269 for Structural Plywood
  • Non-Structural products must not be used in any structural or load-bearing applications


Non-Structural Square Edge